KEY PERFORMANCE DATA
15–20%
Energy Savings
Electricity reduction per year. Up to 24% in laboratory-verified tests.
0.0kg
Ultra-Lightweight
Mounts directly on existing refrigerant pipe. No tools or downtime.
0W
Device Power Draw
Requires only AC 100V–240V and a lead wire contact.
0yr
Design Life
Zero maintenance. No consumable parts.
ENERGY SAVINGS RANGE
BY OBJECTIVE
What Are You Trying to Achieve?
Eco Pulsar solves a few different problems depending on what matters most to your business. Here's how it maps to common objectives.
Cut Energy Costs
Reduce electricity bills 15–20% a year with no capital spend on new equipment — the device pays for itself from the savings.
Meet Sustainability Targets
Every kWh saved cuts roughly 0.4kg of CO₂ — verifiable savings you can report against ESG and carbon-neutral commitments.
Extend Equipment Life
Restoring refrigerant flow reduces compressor strain, easing wear on existing HVAC systems and delaying costly replacement.
De-Risk the Decision
A free verification test proves the savings on your own system before you commit — no equipment modification, nothing to undo.
TECHNICAL SPECIFICATIONS
What Are the Technical Specifications of Eco Pulsar?
Designed for direct installation on existing refrigerant piping. No plumbing modifications, no refrigerant recharging, and no system downtime required during installation.
INSTALLATION & REQUIREMENTS
What Does Installation Involve?
Installation is straightforward and requires no special license. The unit mounts onto existing refrigerant piping — no system downtime and no refrigerant recharging. A free site assessment confirms the ideal location before any work begins.
No installation certification needed
No specific qualification is required to install the unit itself. It surface-mounts onto existing refrigerant piping.
System knowledge helps placement
Familiarity with air-conditioning systems helps identify the best mounting point on the refrigerant circuit — which our team confirms during the free site assessment.
Electrical work is the only exception
An electrical work certification is required only if there is no nearby power outlet and new wiring has to be installed.
Overseas installations
Runs on single-phase 100–240V. For use outside Japan, verify your local voltage and fit an appropriate plug adapter.
IN FULL TRANSPARENCY
When Is the Effect Reduced?
We believe in full transparency. The following environments may experience limited results. We conduct a free verification test before installation to confirm effectiveness.
New equipment (within 1 year)
New systems have not yet accumulated significant molecular clustering or sludge. The ERT effect will become measurable after 1–2 years of operation.
Twin-type multi-split systems
Systems where two compressors share a single refrigerant circuit may require multiple units or a specific installation configuration. A site assessment is required.
Low-polarity refrigerant systems
Certain low-polarity refrigerant types exhibit weaker intermolecular attraction, which limits the degree to which ERT can further reduce clustering. Effectiveness is confirmed during the free verification test.
Heavily modified systems
Systems that have undergone major refrigerant system overhauls may show different baseline measurements than factory-spec systems.
Systems with mechanical faults
Damaged compressors or refrigerant leaks must be repaired before installation for accurate verification results.
Very small residential units
Primarily designed for commercial and industrial systems. Small residential window units may show minimal effect.
Systems already at peak efficiency
A system operating at or above design spec will show minimal improvement from ERT treatment.
Ready to Install Eco Pulsar at Your Facility?
Free assessment, no obligation. We verify performance before commitment.